Current batch now shipping
Limited availability
Front View
Your attack stays sharp.
Your drive stays punchy.
Your ambience stays wide.
Parallelarator
Parallel Effects Mixer & Wet/Dry/Wet Routing Pedal
Run your effects in parallel - not in series
Big, spacious effects without losing your core tone.
Run delay, reverb and modulation in parallel instead of stacking them in series.
£285.00
Including VAT
✓ In Stock - ready to ship
Current batch now shipping.
Limited availability.
🚚 Free UK Shipping
🌍 Worldwide Tracked Shipping from UK
Secure checkout with Paypal & major cards
✔ True wet/dry/wet output capability
✔ Three parallel loops with Independent control
✔ Works in mono, stereo or multi-amp rigs
Players use the Parallelarator to run delay and reverb in parallel - or build a wet/dry/wet rig without complex routing.
✔ True wet/dry/wet output capability
✔ Three parallel loops with Independent control
✔ Works in mono, stereo or multi-amp rigs
Your attack stays sharp.
Your drive stays punchy.
Your ambience stays wide.
Current batch now shipping
Limited availability
Parallelarator
Parallel Effects Mixer & Wet/Dry/Wet Routing Pedal
Run your effects in parallel - not in series
Big, spacious effects without losing your core tone.
Run delay, reverb and modulation in parallel instead of stacking them in series.
£285.00
Including VAT
✓ In Stock - ready to ship
Current batch now shipping
Limited availability
🚚 Free UK Shipping
🌍 Worldwide Tracked Shipping from UK
Secure checkout with Paypal & major cards
Players use the Parallelarator to run delay and reverb in parallel - or build a wet/dry/wet rig without complex routing.
🔷 WHY YOUR SETUP STARTS TO FEEL CROWDED
Most pedalboards are wired in series.
That works — until your rig starts to get serious.
Then things start to break down:
-
Reverbs soften attack
-
Delays blur clarity
-
Boosts change everything downstream
-
Stereo feels smaller than it should
At some point, the limitation isn’t your pedals.
It’s how they’re connected.
And the more you add, the harder it is to stay in control.
🔷 WHAT CHANGES WITH PARALLEL ROUTING
When your rig feels crowded, the problem isn't your pedals - it's the signal path
Parallel routing changes that.
Your dry signal stays untouched.
Everything else is layered around it.
The result:
-
Clearer gain tones
-
Bigger stereo image
-
More controlled ambience
-
Tighter multi-amp rigs
You hear more of your guitar — not less.
🔷 HEAR PARALLEL ROUTING IN ACTION
These examples compare read-world setups - no tricks, no post processing.
🎧 Shape your centre channel clarity
Effects wide, Dry centred
Dry Mix control at minimum
Reverb and delay are panned left and right, while your dry signal stays centred.
This creates a wide stereo image with a clean, untouched core tone.
Add definition to the centre channel
Dry Mix control increased
Increasing Dry Mix blends some effect signal into the centre channel.
This adds clarity and definition while keeping the stereo width intact.
🎸 Add space without losing your core tone
Clean Dry Tone
Your core tone, completely unaffected.
No reverb, no delay — just the direct signal.
Build depth with layered effects
Add reverb in parallel
Reverb is added alongside your dry signal, not through it.
Your tone stays clear and defined — while space is added around it.
⚠️ Use effects that normally don’t work
Effects that would overwhelm a serial chain can be blended for controlled, musical results.
🔊 Keep clarity under gain
Distortion with parallel reverb stays defined instead of turning to mud.
🔥 Build bigger sounds
Stack reverb and delay in parallel without losing definition.
🔷 BUILT FOR YOUR SETUP
Is this for you?
-
Run stereo delay or reverb
-
Use two or more amplifiers
-
Want a true wet/dry or wet/dry/wet setup
-
Want to preserve your dry tone completely
-
Want precise control over how effects sit in your mix
Even in a single-amp setup, it allows true parallel blending.
If your rig is growing in complexity, this is exactly what it's built for.
Use cases:
🎸 Parallel delay & reverb
Space without losing clarity.
🎧 Stereo setups
Wide, immersive sound
🔊 Wet/Dry/Wet rigs
Three amps, full separation
🎛 Effect blending
Control how everything sits
🔷 SEE HOW IT FITS INTO YOUR RIG
No complex routing. Just plug in and play.
Setup is simple — even for complex rigs.
A typical setup
-
Guitar → Drive pedals → Dry input
-
Delay → Loop 1
-
Reverb → Loop 2
-
Modulation → Loop 3
-
Outputs → Amplifiers
What's happening
-
Dry output = full dry signal
-
Left/Right = blended mix
-
Loop levels + Dry Mix control balance everything
The architecture is simple — but powerful.
A typical pedalboard setup
Start with your existing pedals - no special configuration required.
🔷 WHY THE PARALLELARATOR STANDS OUT
Most parallel pedals are limited. This isn't.
🔊 True wet/dry/wet — built in
Run up to three amps without extra gear.
-
One amp → Mono
-
Two → Stereo or Wet/Dry
-
Three → Wet/Dry/Wet
🎛 Three stereo loops
More flexibility than typical units
🔁 No rewiring
Switch setups instantly
⚙️ Full control
Dial in exactly how effects sit
🔷 WHAT THIS REPLACES
Building a proper parallel rig often requires:
• Signal splitter
• Line mixer
• Stereo routing
• Switching systems
• Multiple patch points
The Parallelarator replaces all of it
No external mixer
No improvised signal spilits
No complex rewiring
Just clean, controlled parallel routing.
🔷 HOW IT COMPARES
Feature Parallelarator Typical Parallel Mixer Pedal
Loops 3 Stereo 1-2
Stereo Full Limited
Expandability Parallel link expandable system Fixed architecture
External stereo input Dedicated stereo input support Limited or unsupported
Setup Automatic Manual
Multi-amp Up to 3 amps Limited
🔷 FEATURES
Control your sound — precisely
Parallel routing
Three independent loops
Flexible outputs
Mono, stereo, wet/dry/wet
Stereo/mono per loop
Keep your stereo image wide - even with mono pedals
Independent controls
Level + Dry Mix
Loop 3 performance
Footswitch + phase control
🔷 CONTROL YOUR MIX PRECISELY
Shape how your effects sit around your core tone — without compromising it.
Independent loop levels
Dial in exactly how much of each effect is present in the final mix.
Add subtle space, push effects forward, or keep them tucked behind your dry signal — all without affecting your core tone.
Stereo or mono per loop
Run each loop in stereo or mono.
Mono pedals are distributed across both outputs — so your stereo image stays wide and balanced, even when using non-stereo effects.
Dry Mix control
Blend your dry signal into the left and right outputs.
-
Fully down → effects only (wet)
-
Fully up → dry signal matches the centre (dry) output
This allows:
-
True wet/dry/wet setups
-
Fully wet stereo outputs
-
Precise parallel blending
Dedicated dry output
Your dry signal is always preserved.
The Dry output carries the full, unaffected signal — independent of all mix controls.
Ideal for:
-
Centre amp in wet/dry/wet rigs
-
Maintaining attack and clarity
Loop 3 performance control
Take control in real time.
-
Footswitch for live switching
-
Phase control for alignment or creative textures
🔷 BUILT TO EXPAND
Build a system - not just a pedal
The Parallelarator is designed as pedalboard infrastructure.
Start simple. Expand when you need to.
Add more parallel paths
Need more loops or more complex routing?
Add another Parallelarator.
Multiple units can be linked together to expand your system while keeping signal flow clean and predictable.
Parallel Link system
Units connect via the built-in Parallel Link port.
This allows:
-
A shared mono dry signal across all connected units
-
Stereo return signals to be combined back into the main mix
-
Consistent signal behaviour as your system grows
Your original unit remains part of the signal chain — not bypassed or replaced.
Each additional unit simply extends the available routing.
External stereo input
The Parallel Link port can also accept a standard 3.5mm TRS stereo input.
This allows external audio sources to be blended into your parallel mix:
-
Synths
-
Loopers
-
Drum machines
-
Playback devices
Signal level is controlled at the source device.
Designed to scale with your rig
Add complexity without redesigning your pedalboard.
Keep your routing consistent as your setup grows.
🔷 TECHNICAL SPECIFICATIONS
Designed for clarity, headroom, and stability in complex signal chains.
Signal Architecture
Parallel effects routing system
Three independent stereo loops
Dedicated dry signal path
Wet/dry/wet output capability
Headroom
+9 to +10 dBu @ 9V
+15 to +16 dBu @ 18V
Running at 18V increases internal headroom only — it does not increase output level.
Loop Signal Behaviour
Loop sends operate at system signal level
No attenuation
No boost
Connected pedals should be able to handle the signal level present in your rig.
Controls
Loop level controls (Loops 1, 2 & 3)
Dry Mix control
Stereo/mono switching per loop
Loop 3 footswitch (on/off)
Loop 3 phase inversion switch
Dimensions
78mm (W) × 122mm (L) × 60mm (H)
Including connectors and controls.
Impedance
Dry input: 1 MΩ
Outputs: 100 Ω
Optimised for proper pickup loading and strong signal drive in multi-amp setups.
Frequency Response
10 Hz – 24 kHz
Wide bandwidth design ensures full-range transparency.
Outputs
Left output (wet mix / mono)
Right output (wet mix)
Dry output (full dry signal)
Dry output is unaffected by the Dry Mix control.
Power
9V DC 100mA (centre negative)
Supports 18V operation for increased headroom
Parallel Link (Expansion)
3.5mm TRRS connection for linking multiple units.
Designed for reliable integration between Parallelarator units.
A purpose-built Parallel Link cable is available in the web store.
External Input (via Parallel Link)
Accepts 3.5mm TRS stereo input
Suitable for synths, loopers, drum machines, and playback devices.
Signal level must be controlled at the source.
🔷 TECHNICAL SPECIFICATIONS
Designed for clarity, headroom, and stability in complex signal chains.
Signal Architecture
Parallel effects routing system
Three independent stereo loops
Dedicated dry signal path
Wet/dry/wet output capability
Headroom
+9 to +10 dBu @ 9V
+15 to +16 dBu @ 18V
Running at 18V increases internal headroom only — it does not increase output level.
Loop Signal Behaviour
Loop sends operate at system signal level
No attenuation
No boost
Connected pedals should be able to handle the signal level present in your rig.
Controls
Loop level controls (Loops 1, 2 & 3)
Dry Mix control
Stereo/mono switching per loop
Loop 3 footswitch (on/off)
Loop 3 phase inversion switch
Dimensions
78mm (W) × 122mm (L) × 60mm (H)
Including connectors and controls.
Impedance
Dry input: 1 MΩ
Outputs: 100 Ω
Optimised for proper pickup loading and strong signal drive in multi-amp setups.
Frequency Response
10 Hz – 24 kHz
Wide bandwidth design ensures full-range transparency.
Outputs
Left output (wet mix / mono)
Right output (wet mix)
Dry output (full dry signal)
Dry output is unaffected by the Dry Mix control.
Power
9V DC 100mA (centre negative)
Supports 18V operation for increased headroom
Parallel Link (Expansion)
3.5mm TRRS connection for linking multiple units.
Designed for reliable integration between Parallelarator units.
A purpose-built Parallel Link cable is available in the web store.
External Input (via Parallel Link)
Accepts 3.5mm TRS stereo input
Suitable for synths, loopers, drum machines, and playback devices.
Signal level must be controlled at the source.
🔷 FREQUENTLY ASKED QUESTIONS
Does running at 18V make it louder?
No - It increases headroom, not output level
Can it run in an amplifer effects loop?
Yes - it supports signal levels typical of many amp effect loops.
Will all pedals work in the loops?
The loops operate at your rig’s signal level.
Most pedals will work normally, but you should ensure they can handle that level.
Do I need a special cable to link units?
Yes - linking units requires a purpose built Parallel Link cable, available in the web store.
Can I connect external stereo devices?
Yes — via a standard 3.5mm TRS cable.
Do I need multiple amplifiers to use it?
No — it works with one, two, or three amplifiers.
Does Dry Mix affect the Dry output?
No — the Dry output always carries the full dry signal.
🔷 OPTIONAL PERFORMANCE EXPANSION
Extend the Parallelarator for advanced live control.
Adds:
-
Remote switching for Loops 1 & 2
-
Independent phase control per loop
-
Selectable momentary or latching operation
The Parallelarator is fully functional on it's own.
Nexus-X1 is designed for players who want deeper real-time control.
🔷BUILT FOR LONG-TERM RIGS
The Parallelarator isn’t an effect.
It’s infrastructure.
As your rig grows — more pedals, more amps, more stereo — it scales with you.
With Parallel Link expansion and optional performance control via the Nexus-X1,
it becomes the foundation of a modular routing system.
This isn’t a short-term upgrade.
It’s a long-term routing solution.
🔷CUSTOMER REVIEWS
Average rating
Ratings
_edited.jpg)
Name of Person
Verified Purchaser
I'm a paragraph. Click here to add your own text and edit me. It's easy.
No reviews yet. Be the first to leave a review for this product.
🌍 ORDERING & SHIPPING
We ship worldwide from our UK workshop.
All orders are fully tracked.
🇺🇸 United States — Recommended
Order through our authorised U.S. partner for fastest delivery and no import charges:
Direct UK ordering also is available with duties prepaid.
🇬🇧 United Kingdom
-
Free UK shipping.
-
VAT included.
🇪🇺 European Union
-
Choose duties prepaid (DDP)
-
Or pay on delivery at checkout.
🌎 Rest of World
-
Tracked international shipping.
-
Local import charges may apply.
🔷TAKE CONTROL OF YOUR SIGNAL CHAIN
Parallel routing - without compromise.
Designed to scale with your rig.