Front View
PARALLELARATOR EXPANSION
Parallel Link
Cable
Expand your parallel effects. Keep one clean, simple signal path.
The purpose-built connection for adding another Parallelarator to your system—giving you three more independently blended effects loops each time you expand.
£49.99
Including VAT
✓ In Stock - ready to ship
🚚 Free UK Shipping
🌍 Worldwide Tracked Shipping from UK
Secure checkout with Paypal & major cards
+3 loops per unit
Keep expanding as your rig grows
One cable per unit
No adapters or improvised splits
Stereo in + dry out
Correctly routed between units
🔷 MORE SPACE FOR THE EFFECTS YOU ACTUALLY USE
Add three more loops.
Then add three more.
When three loops are no longer enough, DryOut feeds the main Parallelarator’s buffered dry signal to the additional unit’s Dry Input. The additional unit processes that signal through its three loops, then sends its left and right loop mix from the Left Output back into the main unit through MixerIn. Each Parallelarator you add becomes another seamless three-loop expansion.
MAIN UNIT
Parallelarator 01
Loop 1
Loop 2
Loop 3
↔
PURPOSE BUILT CONNECTION
Parallel Link Cable
TS DryOut: buffered dry to expansion
TRS MixerIn: left + right back to main
↔
EXPANSION UNIT
Parallelarator 02
Loop 4
Loop 5
Loop 6
How to connect and set up the system
Parallel Link → main unit
Connect the 3.5 mm TRRS plug to the Parallel Link socket on the main Parallelarator.
DryOut → additional Dry
Input
Connect the TS plug labelled DryOut to the Dry Input of the additional Parallelarator.
MixerIn → additional Left Output
Connect the TRS plug labelled MixerIn to the Left Output of the additional Parallelarator.
Turn additional Dry Mix to minimum
Set the Dry Mix control on every additional Parallelarator fully anti-clockwise, so only its loop signals pass to the main unit.
Connect amplifiers to the main unit
Connect your amplifier or amplifiers to the output jacks on the main Parallelarator, just as you would with a single unit.
Leave the additional unit’s Right Output unconnected. Its Left Output carries both left and right channels when nothing is plugged into the Right Output.
Use the main unit’s Dry Mix control to set the dry level. The main unit combines the dry signal with the loops from every linked Parallelarator, then routes the complete system through its output jacks to the connected amplifiers.
Need more? Add another Parallel Link cable and Parallelarator for loops 7–9,
then repeat as required.
🔷 COMPATIBILITY
Everything you need.
Nothing you don't.
This is a dedicated expansion cable, not a standard stereo or aux lead. Use one cable for each additional Parallelarator you add to the system.
Designed for
Linking multiple Cosmic Loop FX Parallelarator pedals
Expansion
Adds 3 parallel effects loops per additional Parallelerator
Length
58 cm
TRRS end
Connect to Parallel Link on the main unit
MixerIn (TRS)
Connect to Left Ouput on the additional unit; leave Right Output unused
DryOut (TS)
Connect to Dry Input on the additonal unit
Additional Units
Set Dry Mix fully anti-clockwise
Main unit
Sets the dry level; connect amplifiers to it's output jacks
Important
Not intended as a general-purpose TRRS breakout cable
In the box
1 x Parallelarator Parallel Link cable
YOUR RIG HAS ROOM TO GROW
Keep every effect in it's own lane.
Add three independenty controlled loops with each additional Parallelarator, while preserving the spacious parallel routing you brought it for.