Current batch now shipping

Limited availability

Front View

Your attack stays sharp.

Your drive stays punchy.

Your ambience stays wide.

Parallelarator

Parallel Effects Mixer & Wet/Dry/Wet Routing Pedal

Run your effects in parallel - not in series

Big, spacious effects without losing your core tone.

Run delay, reverb and modulation in parallel instead of stacking them in series.

£285.00

Including VAT

Final units remaining in this batch.

Next build begins once sold out.

🚚 Free UK Shipping
🌍 Worldwide Tracked Shipping from UK

Secure checkout with Paypal & major cards

✔ True wet/dry/wet output capability

✔ Three parallel loops with Independent control

✔ Works in mono, stereo or multi-amp rigs

Players use the Parallelarator to run delay and reverb in parallel - or build a wet/dry/wet rig without complex routing.

🔷 WHY YOUR SETUP STARTS TO FEEL CROWDED

Most pedalboards are wired in series.

That works — until your rig starts to get serious.

Then things start to break down:

Reverbs soften attack
Delays blur clarity
Boosts change everything downstream
Stereo feels smaller than it should

At some point, the limitation isn’t your pedals.
It’s how they’re connected.

And the more you add, the harder it is to stay in control.

🔷 WHAT CHANGES WITH PARALLEL ROUTING

When your rig feels crowded, the problem isn't your pedals - it's the signal path

Parallel routing changes that.

Your dry signal stays untouched.

Everything else is layered around it.

The result:

Clearer gain tones
Bigger stereo image
More controlled ambience
Tighter multi-amp rigs

You hear more of your guitar — not less.

🔷 HEAR PARALLEL ROUTING IN ACTION

These examples compare read-world setups - no tricks, no post processing.

🎧 Shape your centre channel clarity

Effects wide, Dry centred
Dry Mix control at minimum

Reverb and delay are panned left and right, while your dry signal stays centred.

This creates a wide stereo image with a clean, untouched core tone.

Add definition to the centre channel
Dry Mix control increased

Increasing Dry Mix blends some effect signal into the centre channel.

This adds clarity and definition while keeping the stereo width intact.

🎸 Add space without losing your core tone
Clean Dry Tone

Your core tone, completely unaffected.

No reverb, no delay — just the direct signal.

Build depth with layered effects
Add reverb in parallel

Reverb is added alongside your dry signal, not through it.

Your tone stays clear and defined — while space is added around it.

⚠️ Use effects that normally don’t work

Effects that would overwhelm a serial chain can be blended for controlled, musical results.

🔊 Keep clarity under gain

Distortion with parallel reverb stays defined instead of turning to mud.

🔥 Build bigger sounds

Stack reverb and delay in parallel without losing definition.

🔷 BUILT FOR YOUR SETUP

Is this for you?

Run stereo delay or reverb
Use two or more amplifiers
Want a true wet/dry or wet/dry/wet setup
Want to preserve your dry tone completely
Want precise control over how effects sit in your mix

Even in a single-amp setup, it allows true parallel blending.

If your rig is growing in complexity, this is exactly what it's built for.

Use cases:

🎸 Parallel delay & reverb

Space without losing clarity.

🎧 Stereo setups

Wide, immersive sound

🔊 Wet/Dry/Wet rigs

Three amps, full separation

🎛 Effect blending

Control how everything sits

🔷 SEE HOW IT FITS INTO YOUR RIG

No complex routing. Just plug in and play.

Setup is simple — even for complex rigs.

A typical setup

Guitar → Drive pedals → Dry input
Delay → Loop 1
Reverb → Loop 2
Modulation → Loop 3
Outputs → Amplifiers

What's happening

Dry output = full dry signal
Left/Right = blended mix
Loop levels + Dry Mix control balance everything

The architecture is simple — but powerful.

Parallelarator PedalBoard Connections 1.webp

A typical pedalboard setup

Start with your existing pedals - no special configuration required.

🔷 WHY THE PARALLELARATOR STANDS OUT

Most parallel pedals are limited. This isn't.

🔊 True wet/dry/wet — built in

Run up to three amps without extra gear.

One amp → Mono
Two → Stereo or Wet/Dry
Three → Wet/Dry/Wet

🎛 Three stereo loops

More flexibility than typical units

🔁 No rewiring

Switch setups instantly

⚙️ Full control

Dial in exactly how effects sit

🔷 WHAT THIS REPLACES

Building a proper parallel rig often requires:

• Signal splitter
• Line mixer
• Stereo routing
• Switching systems
• Multiple patch points

The Parallelarator replaces all of it

No external mixer

No improvised signal spilits

No complex rewiring

Just clean, controlled parallel routing.

🔷 HOW IT COMPARES

Feature Parallelarator Typical Parallel Mixer Pedal

Loops 3 Stereo 1-2

Stereo Full Limited

Expandability Parallel link expandable system Fixed architecture

External stereo input Dedicated stereo input support Limited or unsupported

Setup Automatic Manual

Multi-amp Up to 3 amps Limited

🔷 FEATURES

Control your sound — precisely

Parallel routing

Three independent loops

Flexible outputs

Mono, stereo, wet/dry/wet

Stereo/mono per loop

Keep your stereo image wide - even with mono pedals

Independent controls

Level + Dry Mix

Loop 3 performance

Footswitch + phase control

🔷 CONTROL YOUR MIX PRECISELY

Shape how your effects sit around your core tone — without compromising it.

Independent loop levels

Dial in exactly how much of each effect is present in the final mix.

Add subtle space, push effects forward, or keep them tucked behind your dry signal — all without affecting your core tone.

Stereo or mono per loop

Run each loop in stereo or mono.

Mono pedals are distributed across both outputs — so your stereo image stays wide and balanced, even when using non-stereo effects.

Dry Mix control

Blend your dry signal into the left and right outputs.

Fully down → effects only (wet)
Fully up → dry signal matches the centre (dry) output

This allows:

True wet/dry/wet setups
Fully wet stereo outputs
Precise parallel blending

Dedicated dry output

Your dry signal is always preserved.

The Dry output carries the full, unaffected signal — independent of all mix controls.

Ideal for:

Centre amp in wet/dry/wet rigs
Maintaining attack and clarity

Loop 3 performance control

Take control in real time.

Footswitch for live switching
Phase control for alignment or creative textures

🔷 BUILT TO EXPAND

Build a system - not just a pedal

The Parallelarator is designed as pedalboard infrastructure.

Start simple. Expand when you need to.

Add more parallel paths

Need more loops or more complex routing?

Add another Parallelarator.

Multiple units can be linked together to expand your system while keeping signal flow clean and predictable.

Parallel Link system

Units connect via the built-in Parallel Link port.

This allows:

A shared mono dry signal across all connected units
Stereo return signals to be combined back into the main mix
Consistent signal behaviour as your system grows

Your original unit remains part of the signal chain — not bypassed or replaced.

Each additional unit simply extends the available routing.

External stereo input

The Parallel Link port can also accept a standard 3.5mm TRS stereo input.

This allows external audio sources to be blended into your parallel mix:

Synths
Loopers
Drum machines
Playback devices

Signal level is controlled at the source device.

Designed to scale with your rig

Add complexity without redesigning your pedalboard.

Keep your routing consistent as your setup grows.

🔷 TECHNICAL SPECIFICATIONS

Designed for clarity, headroom, and stability in complex signal chains.

Signal Architecture

Parallel effects routing system
Three independent stereo loops
Dedicated dry signal path
Wet/dry/wet output capability

Headroom

+9 to +10 dBu @ 9V
+15 to +16 dBu @ 18V

Running at 18V increases internal headroom only — it does not increase output level.

Loop Signal Behaviour
Loop sends operate at system signal level
No attenuation
No boost

Connected pedals should be able to handle the signal level present in your rig.

Controls

Loop level controls (Loops 1, 2 & 3)
Dry Mix control
Stereo/mono switching per loop
Loop 3 footswitch (on/off)
Loop 3 phase inversion switch

Dimensions

78mm (W) × 122mm (L) × 60mm (H)

Including connectors and controls.

Impedance

Dry input: 1 MΩ
Outputs: 100 Ω

Optimised for proper pickup loading and strong signal drive in multi-amp setups.

Frequency Response

10 Hz – 24 kHz

Wide bandwidth design ensures full-range transparency.

Outputs

Left output (wet mix / mono)
Right output (wet mix)
Dry output (full dry signal)

Dry output is unaffected by the Dry Mix control.

Power

9V DC 100mA (centre negative)
Supports 18V operation for increased headroom

Parallel Link (Expansion)

3.5mm TRRS connection for linking multiple units.

Designed for reliable integration between Parallelarator units.

A purpose-built Parallel Link cable is available in the web store.

External Input (via Parallel Link)

Accepts 3.5mm TRS stereo input

Suitable for synths, loopers, drum machines, and playback devices.

Signal level must be controlled at the source.

WHAT PLAYERS ARE SAYING...

“Much, much lower noise level and a totally clean signal.” — Ken D

🔷 FREQUENTLY ASKED QUESTIONS

Does running at 18V make it louder?

No - It increases headroom, not output level

Can it run in an amplifer effects loop?

Yes - it supports signal levels typical of many amp effect loops.

Will all pedals work in the loops?

The loops operate at your rig’s signal level.

Most pedals will work normally, but you should ensure they can handle that level.

Do I need a special cable to link units?

Yes - linking units requires a purpose built Parallel Link cable, available in the web store.

Can I connect external stereo devices?

Yes — via a standard 3.5mm TRS cable.

Do I need multiple amplifiers to use it?

No — it works with one, two, or three amplifiers.

Does Dry Mix affect the Dry output?

No — the Dry output always carries the full dry signal.

🔷 OPTIONAL PERFORMANCE EXPANSION

Nexus-X1 (coming soon)

Extend the Parallelarator for advanced live control.

Adds:

Remote switching for Loops 1 & 2
Independent phase control per loop
Selectable momentary or latching operation

The Parallelarator is fully functional on it's own.

Nexus-X1 is designed for players who want deeper real-time control.

🔷BUILT FOR LONG-TERM RIGS

The Parallelarator isn’t an effect.
It’s infrastructure.

As your rig grows — more pedals, more amps, more stereo — it scales with you.

With Parallel Link expansion and optional performance control via the Nexus-X1,

it becomes the foundation of a modular routing system.

This isn’t a short-term upgrade.

It’s a long-term routing solution.

🔷CUSTOMER REVIEWS

average rating is 3 out of 5

Average rating

Ratings

Name of Person