top of page
CLFX_BlackChips.jpg

Parallel Drive Pt2: Shaping Your Tone with Switching and Phase

6 days ago
6 min read
Three guitar pedals in amber, purple and teal on a dark pedalboard, with coloured light trails behind them.

Part 2 of our series exploring parallel drive.


In part one, we explored how running overdrive, distortion and fuzz in parallel lets you blend separate gain voices. Each pedal processes the same input, and the Parallelarator brings their outputs together in a mix you can shape.


Once you’ve found a combination you like, there’s more to explore. The balance between the voices can change how your guitar responds. Switching a path can take you from a restrained rhythm sound to something heavier. Changing the phase relationship can reshape the blend in ways you might not expect.


This time, we’ll build some practical sounds, explore the Parallelarator’s existing Loop 3 controls, and look at how the Nexus-X1 add-on expands those options while playing.


Give each voice a role

Three available loops don’t mean you need three pedals running at equal levels. A useful starting point is to choose one drive as your foundation, then introduce another for a particular quality you want to add.


That might be a distortion with a grainier texture, a fuzz with a broad low end, or an overdrive with a pronounced midrange. Listen to each on its own first. Then bring the second voice up from zero while playing the same phrase.


You may find that a small contribution does enough. A fuzz that feels overwhelming on its own can become useful when it sits beneath another voice. Equally, a bright overdrive might add an edge to a darker distortion without needing to dominate the sound.


Keep an ear on the overall level. Adding paths can make the blend louder, and that extra level may also push your amp into more distortion. If you want to judge what the pedals themselves are contributing, compare at similar listening volumes and use an amp setting with enough headroom to hear the differences.


Three starting points for your blend

A defined rhythm sound with extra weight

Use a low-to-medium-gain overdrive as the main voice. Add a more saturated distortion at a lower loop level, listening for the point where it fills out sustained notes without overpowering the overdrive’s attack.


Try adjusting the distortion’s tone control before adding more level. If the combined sound becomes too dense, reducing some low end on one pedal may be more useful than reducing its gain.


Fuzz as a layer

Start with an overdrive sound you already enjoy, then blend in a fuzz that works comfortably after a buffer. Try the fuzz at a more extreme setting than you would normally use by itself, but keep its contribution low initially.


Listen to single notes and chords. A balance that sounds exciting for a lead line may feel crowded with full chords. Choose the blend for the part you’re actually going to play.


Three contrasting voices

For a broader experiment, use a lighter overdrive, a more saturated distortion and a fuzz across the three loops. Establish your core sound with the overdrive, bring in the distortion, then add just enough fuzz to hear what it contributes.


You don’t have to keep all three audible throughout a song. This setup becomes particularly interesting when you can bring individual voices into and out of the blend.


Use Loop 3 to change the sound underfoot

The Parallelarator already provides footswitch control on Loop 3. Put your additional distortion or fuzz there, and keep your foundation drive in Loop 1 or 2.


Set the blend with Loop 3 active, then use the footswitch to stop sending signal to that pedal. You can return to the lighter foundation sound and bring the extra voice back when a chorus, lead line or heavier passage needs it.


Keep the pedal in Loop 3 engaged. As we covered in part one, bypassing a drive usually leaves a clean signal passing through that path; it doesn’t remove the path from the mix.


There’s also an important detail to how the Parallelarator switches: the Loop 3 footswitch switches the send, while the return remains connected. This allows delay and reverb tails to continue. With a conventional drive pedal, its guitar-driven contribution will normally fall away when the send is switched off, but noise or self-generated sound at the pedal’s output can still reach the mix.


Try setting the Loop 3 level for a useful musical change rather than the biggest possible jump. Adding a second gain voice can alter volume, texture and the signal hitting the amp at the same time.


Explore phase as part of the sound


Phase illustration: “Amber and purple light ribbons overlap above two guitar pedals, illustrating how parallel signals interact

When parallel paths are mixed, their relationship matters. Some pedals invert polarity, and their filtering can change how different frequencies line up. Two pedals that sound full individually can produce a thinner or quieter blend together.


The Parallelarator’s Loop 3 phase switch inverts that loop’s polarity. It gives you two relationships to compare against the other paths, rather than a continuously adjustable phase control.


To explore it, place one drive in Loop 1 and another in Loop 3. Start with Dry Mix down, listen to both together, then compare the two positions of the Loop 3 phase switch. Listen for changes in body, attack and level. Repeat with a different balance between the loops.


If the blend has unexpectedly lost body, one position may give you a more useful result. But phase inversion can also be a creative choice. A thinner, more hollow blend might suit a particular riff or contrast well with a fuller section of the song.

Distorted paths contain different harmonic content, so the result won’t necessarily be simple cancellation. It depends on the pedals, their settings and how strongly you play. A sound that works for hard-picked chords may behave differently as a note decays.


The phase switch changes how the loop combines with the other signals. It isn’t an EQ control, and it won’t correct every frequency-dependent phase difference. Its purpose here is also separate from correcting a phase mismatch between amplifiers.


Expand the options with Nexus-X1

Loop 3 is a useful starting point for performance control. Nexus-X1 is a small add-on pedal for the Parallelarator that expands the possibilities, adding footswitch control of loops 1 and 2, phase options for each loop, and a choice of latching or momentary operation for its footswitches.


That means you can build combinations around several independently switchable voices. Keep one drive as your foundation, add another for a fuller rhythm sound, and bring in a third for a different lead texture.


The additional phase options also let you explore the relationships between those voices without having to move a pedal into Loop 3 just to compare an inverted blend. Set these by listening to the combinations you intend to use: the preferred phase setting for two voices may not be the one you prefer when all three are involved.


Make momentary switching part of your playing


Momentary switching: “Close-up of a guitarist’s shoe pressing one of two footswitches on a pedalboard controller.

Latching operation is useful when you want a change to stay in place until the next press. Momentary operation gives you a different way to interact with the blend: the switched state applies while you hold the footswitch, then returns when you release it.


Configured to bring in an extra voice while held, this could let you add fuzz to the last note of a phrase, give a chord a brief burst of distortion, or change the texture of a sustained note halfway through its decay.


You can also explore briefly taking a voice away from a fuller blend. The musical change may be a drop in saturation, a shift in emphasis, or a more obvious change in level, depending on the remaining paths.


Start with slow, deliberate changes and listen to how the sound responds. The effect doesn’t need to be dramatic to be useful. A small change in texture on a single note can become part of the phrasing.


Build combinations you’ll actually use

Once you’ve explored the possibilities, choose a few sounds that serve your playing. For example, establish a foundation drive, a fuller two-voice blend and a third texture for occasional accents.


Check each combination with the same riff, then try it in the passage where you want to use it. Listen for unwanted level jumps, missing body and whether the extra voice adds something you can hear in context.


Parallel drive gives you room to experiment with pedals you already own. The Parallelarator lets you build and balance the paths, while its Loop 3 controls—and the expanded options of Nexus-X1—help you turn that blend into something you can change while playing.


In part three, we’ll look at bringing complementary parallel gain voices together in a single pedal, reducing the need for separate drive pedals and the cabling between them.

 
 
 

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page